 Notes |
(0010822)
laurent (developer)
2014-05-15 21:05
|
Reproduced. Weird. |
|
(0010823)
laurent (developer)
2014-05-16 10:21
|
I don't understand yet what's going on. A truss shows the .doc file is first opened read only, then read-write, and apparently the same data that was just read is written back. It makes little sense.
The "Unable to open file" seemes to be the main symptom here.
I've updated the ImageMagick version to 6.8.9-1, and the behaviour is the same.
Can you provide the exact compilation steps you used? |
|
(0010824)
tt4l (reporter)
2014-05-16 10:36
|
I forgot to write that we are using Solaris 11.1. I did not use any special options, but just untar and ./configure --prefix=...
I can attach the config.log, if this helps. Could it be the gcc version or some library? I am using gcc 4.5.2:
root@pictstore:/usr/local/stow/tmp/ImageMagick-6.8.9-1# gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/gcc/4.5/lib/gcc/i386-pc-solaris2.11/4.5.2/lto-wrapper
Target: i386-pc-solaris2.11
Configured with: /builds/hudson/workspace/nightly-update/build/i386/components/gcc45/gcc-4.5.2/configure CC=/ws/on11update-tools/SUNWspro/sunstudio12.1/bin/cc CXX=/ws/on11update-tools/SUNWspro/sunstudio12.1/bin/CC --prefix=/usr/gcc/4.5 --mandir=/usr/gcc/4.5/share/man --bindir=/usr/gcc/4.5/bin --libdir=/usr/gcc/4.5/lib --sbindir=/usr/gcc/4.5/sbin --infodir=/usr/gcc/4.5/share/info --libexecdir=/usr/gcc/4.5/lib --enable-languages=c,c++,fortran,objc --enable-shared --with-gmp-include=/usr/include/gmp --with-mpfr-include=/usr/include/mpfr --without-gnu-ld --with-ld=/usr/bin/ld --with-gnu-as --with-as=/usr/gnu/bin/as CFLAGS='-g -O2 '
Thread model: posix
gcc version 4.5.2 (GCC)
root@pictstore:/usr/local/stow/tmp/ImageMagick-6.8.9-1# ldd /usr/local/stow/ImageMagick-6.8.9-1/bin/convert
libMagickCore-6.Q16.so.2 => /usr/local/stow/ImageMagick-6.8.9-1/lib/libMagickCore-6.Q16.so.2
libMagickWand-6.Q16.so.2 => /usr/local/stow/ImageMagick-6.8.9-1/lib/libMagickWand-6.Q16.so.2
liblcms.so.1 => /usr/lib/liblcms.so.1
libtiff.so.3 => /usr/lib/libtiff.so.3
libjpeg.so.62 => /usr/lib/libjpeg.so.62
libpng14.so.14 => /usr/lib/libpng14.so.14
libfftw3.so.3 => /usr/lib/libfftw3.so.3
libXext.so.0 => /usr/lib/libXext.so.0
libXt.so.4 => /usr/lib/libXt.so.4
libbz2.so.1 => /usr/lib/libbz2.so.1
libxml2.so.2 => /lib/libxml2.so.2
libz.so.1 => /lib/libz.so.1
libSM.so.6 => /usr/lib/libSM.so.6
libICE.so.6 => /usr/lib/libICE.so.6
libX11.so.4 => /usr/lib/libX11.so.4
libgomp.so.1 => /usr/lib/libgomp.so.1
libm.so.2 => /lib/libm.so.2
libpthread.so.1 => /lib/libpthread.so.1
libc.so.1 => /lib/libc.so.1
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1
libsocket.so.1 => /lib/libsocket.so.1
libnsl.so.1 => /lib/libnsl.so.1
libxcb.so.1 => /usr/lib/libxcb.so.1
libmp.so.2 => /lib/libmp.so.2
libmd.so.1 => /lib/libmd.so.1
libXau.so.6 => /usr/lib/libXau.so.6
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6
libsoftcrypto.so.1 => /lib/libsoftcrypto.so.1
libelf.so.1 => /lib/libelf.so.1
libcryptoutil.so.1 => /lib/libcryptoutil.so.1
libXevie.so.1 => /usr/lib/libXevie.so.1
libXss.so.1 => /usr/lib/libXss.so.1 |
|
(0010825)
laurent (developer)
2014-05-16 11:10
|
Yes, please attach config.log and the whole output of configure itself, so I can check what it picked. |
|
(0010826)
tt4l (reporter)
2014-05-16 11:46
|
I have attached "./configure --prefix=/usr/local/stow/ImageMagick-6.8.9-1" output and old config.log. New config.log just has different date and path names. |
|
(0010828)
tt4l (reporter)
2014-05-16 13:14
|
I think I have less libraries/options compiled in, probably just because some devel libs are not installed:
root@pictstore:/usr/local/stow/tmp/test# convert --version
Version: ImageMagick 6.8.8-7 Q16 i386 2014-03-03 http://www.imagemagick.org [^]
Copyright: Copyright (C) 1999-2014 ImageMagick Studio LLC
Features: DPC HDRI Modules OpenMP
Delegates: bzlib cairo djvu fftw fontconfig freetype fpx gslib gvc jbig jng jpeg lcms lqr ltdl lzma openexr pangocairo png ps rsvg tiff webp wmf x xml zlib
root@pictstore:/usr/local/stow/tmp/test# /usr/local/stow/ImageMagick-6.8.9-1/bin/convert -version
Version: ImageMagick 6.8.9-1 Q16 i386 2014-05-16 http://www.imagemagick.org [^]
Copyright: Copyright (C) 1999-2014 ImageMagick Studio LLC
Features: DPC OpenMP
Delegates: bzlib fftw jng jpeg lcms png tiff x xml zlib |
|
(0010829)
laurent (developer)
2014-05-16 13:17
|
Yes, it's clearly the fpx one that is a problem here. I'm doing a test rebuild without it. |
|
(0010830)
laurent (developer)
2014-05-16 13:57
|
Without FPX, the original file is not overwritten, but no output, with a different error message. I've asked upstream.
$ convert file.doc file.jpg
convert: no decode delegate for this image format `FPX' @ error/constitute.c/ReadImage/501.
convert: no images defined `Intercultural_Sensitivity_Questionnaire.jpg' @ error/convert.c/ConvertImageCommand/3187. |
|
(0010831)
laurent (developer)
2014-05-16 14:14
|
Upstream confirms this is a bug and they will fix it shortly.
http://www.imagemagick.org/discourse-server/viewtopic.php?f=3&t=25584 [^] |
|
(0010832)
tt4l (reporter)
2014-05-16 15:01
|
very nice. thanks for work and reporting it upstream. when will the corrected package will appear in testing branch? will we need to wait 2 weekr or can you provide a "prerelase" without fpx? |
|
(0010833)
laurent (developer)
2014-05-16 15:07
|
If they deliver it tomorrow and there's no other issue, I can probably push an experimental build this weekend. |
|
(0010834)
laurent (developer)
2014-05-18 21:09
|
Packages done with the 20140517 beta of 6.8.9-2 are now on experimental:
http://buildfarm.opencsw.org/experimental.html#laurent [^]
They appear to run soffice, which I don't have, so I can't confirm if it works.
Please give them a try. |
|
(0010835)
tt4l (reporter)
2014-05-18 22:43
|
This fixes the issue, thank you!
I had to switch from "testing" to "unstable" because CSWlibopenjp2-7 was missing for the command "pkgutil -t http://buildfarm.opencsw.org/opencsw/experimental/laurent [^] -i imagemagick"
Do I have to go to unstable on the production machine also? Probably this is not an issue, because packages from unstable come to testing after 2 weeks, if I read your wiki correctly. Then I could switch back to testing? Thanks again! |
|
(0010836)
laurent (developer)
2014-05-19 08:49
|
That should be fine, yes.
A more recent version of OpenJPEG was needed to build the latest IM. Do note that since this package is the build from a beta, I won't push it, I'll wait until they deliver the final -2 version. It should work for you until then in any case. |
|
(0010857)
laurent (developer)
2014-06-11 10:05
|
Final version of 6.8.9-2 has been built and uploaded, and appears to deal properly with PDF. |
|
test.doc [^] (22,016 bytes) 2014-05-15 12:22
config.log [^] (642,859 bytes) 2014-05-16 10:37
